SONY ERICSSON UNLOCK SOFTWARE
Remove the network lock off your Sony Ericsson mobile phone works online and in real time.
Articles
Ultimate Unlocker instruction can be found on this page there are two different sets of instructions below depending on the cable you are using.
Make sure you follow each step correctly otherwise the process will not work and you could end up damaging your phone.
Ultimate Unlocker Instructions
1. You need to purchase a D-Ultimate Unlocker supreme credit click here to order. Then you will need to download the latest version of the ultimate unlocker client by clicking here.
File is compressed using RAR format. Please use free tools like winrar to decompress.
2.: Open the folder and find the setup file. Double click this and program will begin the install.
Once installed locate the program by going to the start button then all programs or use the icon that will be on your desktop.
Click the ultimateunlocker.exe file it should now open up the main client.
3. Next install the USB flash drivers for ultimate unlocker follow these simple steps.
Follow these simple steps
- Make sure the phone is powered off and battery and cable are removed
- Insert the battery dont turn on the phone and press and hold down the C button on the phones keypad and connect the cable.
- A found new hardware wizard will appear and ask you to search windows update select not at this time and then choose:
Install from a list or specific location (Advanced) - click "Browse" and look for drivers in the path: C:\Program Files\Ultimate Unlocker\Drivers\USB Flash vX.X.X.X
* in case you installed the application elsewhere, replace “C:\Program Files\Ultimate Unlocker” by your install path
click "Next" and then "Finish" The phone may power on itself after a minute, so when driver installation is finished, disconnect the phone and remove/install its battery - If a found new hardware wizard doesnt appear try connecting the phone while holding 2 and 5 and not C.
Download our video of driver install for Vista click here
4. Once the above steps are all completed fully please go to the start button then all programs and select the ultimateunlocker.exe
5. Select the settings tab on the client and make sure you have the correct information for our server showing this should be as below. These are preloaded just make sure they are correct.
Connection Settings
Server Address: 60.54.216.58
Port: 9001
Your Account Info
Enter the username and password issued to you for use with this server from your reseller. Enter these then press the save button.
6. Now select the job tab and select your model of phone from the drop down menu
7. Now select your operation from the client choose from
(a) direct unlock without showing the codes
(b) Relock phone this requires you to enter the MNC of network again
(c) Just read codes this will read codes from the phone and display them on screen
8. Now depending on your cable you need to select one of the following options
For DCU60/65 then you need to connect the phone switched off holding down the 2 and 5 buttons on the keypad. Unless your model is a W880/W888 in which case you connect while holding down the 2 and * keys.
or for the UC10 or UC20 then you need to click the device in the top left hand corner of the client then follow the prompts on screen.
Copyright © 2011